This guide is educational information, not personal medical advice. The source-check date records editorial work, not a clinician review. Read our medical disclaimer.

Reading the kit and acting on each outcome

Before taking the test, check the expiration date and read the instructions for that particular product. Prepare a timer and a private space. The instructions explain sample collection, the control indicator, and when the result must be read; do not substitute the timing from another brand.

If the control indicates an invalid test, the test did not work: use another test or seek testing at a clinic. If the test is reactive, arrange follow-up through a health care provider. Write down the product name and result and ask where the next sample will be collected and when the answer is expected.

If the test is negative, compare the date of the possible exposure with the kit’s test window. A recent exposure may require repeat testing. Report PrEP, PEP, or other HIV medicines to the provider because these can delay detection. A self-test result describes your status, not a partner’s.

Sources for this section: [1][5][3]

Using a self-test

A self-test lets you collect a sample and obtain an initial result outside a clinic. Read the instructions for the specific kit, including sample collection, timing, and how to interpret the result. Make sure you can contact a health care provider or testing service if you need help interpreting it.

Before starting, check the expiration date and make sure you understand the instructions, including the timing and any control indicator. Set a timer if the kit requires one. An invalid result is not the same as a negative result; follow the kit instructions or contact its support line.

Sources for this section: [1]

If the result is positive

A positive self-test is not the end of the testing process. Contact a health care provider promptly for follow-up testing. Ask how to arrange it, when results will be available, and what support is offered. If HIV is confirmed, a provider can help you start treatment and connect to care.

The test manufacturer’s support line may provide confidential counseling and referrals. You can also contact a local testing site or clinician. Ask whether you need an appointment and what to bring; do not let uncertainty about the next step stop you from seeking follow-up.

Sources for this section: [1][2]

If the result is negative

A negative result does not necessarily rule out a very recent infection. The window period depends on the test. If you test after the window for your test, have no additional possible exposure during that time, and receive a negative result, CDC says you do not have HIV. Discuss PrEP or PEP use with a clinician because medicines can affect detection.

The result applies to the test you used and the timing of your possible exposures. A later exposure may require a new testing plan. If you have taken HIV prevention medicines, tell the clinician, because those medicines may delay detection and affect how follow-up results are interpreted.

Sources for this section: [1][3]

When not to wait

If a possible exposure occurred within the past 72 hours, seek urgent medical care and ask about PEP. A home test cannot replace this time-sensitive assessment. Even if a self-test is negative, tell the clinician when the possible exposure occurred and ask about follow-up testing.

If a recent event may have exposed you to HIV, do not spend the 72-hour PEP window waiting for another self-test. An emergency department, urgent care, or clinician can assess the situation immediately and arrange the appropriate follow-up testing.

The kit’s manufacturer or a testing service can explain an invalid or difficult-to-read result. If the instructions are unclear or the control indicator does not work, ask for help and arrange another test rather than treating it as negative.

Sources for this section: [4][5][1]

Make the result useful

Before you begin, find the instructions for your specific kit and check the expiration date. Follow the kit’s timing and sample instructions; reading it outside the specified interval or an invalid control can make the result uninterpretable.

Choose a private way to receive any follow-up call. A reactive self-test needs additional testing through a health provider, while an invalid result means the test did not work and needs a new test.

Sources for this section: [5]

Check the source

Sources & editorial note

We use the sources below to support this guide. Follow a source link for its full guidance and any later changes. Source checking does not replace medical review or a conversation with your care team.

  1. Self Testing CDC. Accessed .
  2. Locate an HIV Care Provider HIV.gov. Accessed .
  3. HIV Testing CDC. Accessed .
  4. Preventing HIV with PEP CDC. Accessed .
  5. Getting Tested for HIV CDC. Accessed .

Prepared by HIV Guide editorial team. How we write and check our guides · Contact and corrections information